Volume & Issue: Articles in Press
Number of Articles: 40
Investigating the microstructure and mechanical properties of vanadium bearing delta-Trip Steel

Articles in Press, Accepted Manuscript, Available Online from 30 December 2023

10.22034/ijme.2023.417333.1832

Yaser Emamian; AliReza Kolahi; Yahya palizdar

Experimental study of energy absorption of sandwich panel with composite/elastomer skin

Articles in Press, Accepted Manuscript, Available Online from 30 December 2023

10.22034/ijme.2023.418015.1840

hamid reza rezayat; hossein toozandehjani; amir Zakeri

Investigating electrical resistance and thermal analysis of hot spinning of titanium using resistance method

Articles in Press, Accepted Manuscript, Available Online from 06 January 2024

10.22034/ijme.2024.411268.1814

mohsen ghafari; Majid Elyasi; Mohammad Javad Mirnia

Deposition of Continuous Glass Fibers on a Curved Surface by 3D Printer Based on Fused Filament Fabrication Technology

Articles in Press, Accepted Manuscript, Available Online from 08 January 2024

10.22034/ijme.2024.429126.1885

Behnam Akhoundi; Erfan Khosravian; Vahid Modanloo

Experimental investigation of electroplastic effect on strain behavior of 6T-6061 aluminum sheet through uniaxial tensile test

Articles in Press, Accepted Manuscript, Available Online from 18 January 2024

10.22034/ijme.2024.432255.1890

Seyed Hossein Eslami; Hamid Gorji; Mohammad Bakhshi-Jooybari; Amirhesam Farkhondeh

Investigation of the effect of die diameter on the structural properties of extruded polyethylene foams

Articles in Press, Accepted Manuscript, Available Online from 18 January 2024

10.22034/ijme.2024.433989.1907

nima feizlou; Taher Azdast; Rezgar Hasanzadeh; Milad Rostami; nima ashrafi

The Effect of Screw Arrangement and Drilling Parameters on the Fracture Fixation Strength of Femoral Neck

Articles in Press, Accepted Manuscript, Available Online from 19 January 2024

10.22034/ijme.2024.417897.1839

Ali Amani Raftar; Mohammad Mahdi Abootorabi

Experimental feasibility study of forming copper sheets by vacuum forming method

Articles in Press, Accepted Manuscript, Available Online from 19 January 2024

10.22034/ijme.2024.432653.1892

Mohsen Khadem; Seyed Jalal Hemmati

Development of a digital shear stress sensor based on induced phase difference, in order to prevent bedsores

Articles in Press, Accepted Manuscript, Available Online from 30 January 2024

10.22034/ijme.2024.434979.1916

Kiana Sadat Mousavi Jarahi; Yousef Hojjat; Behzad Ghavami Namin

Design, manufacturing and calibration of a micro syringe pump for micro-fluidics applications

Articles in Press, Accepted Manuscript, Available Online from 31 January 2024

10.22034/ijme.2024.432467.1891

mohammad Azaran; Sajjad Mazloom baghsiahi; Maryam Moghaddam Matin; Behnam Moetakef-Imani

Statistical Analysis and Optimization of Friction Stir Additive Manufacturing Process Variables for Aluminum Silicon Carbide Nanocomposite Using the Response Surface Method

Articles in Press, Accepted Manuscript, Available Online from 01 February 2024

10.22034/ijme.2024.431334.1888

Mohammad Sharifizadeh; nasrollah bani mostafa arab; Amir Refahi Oskouei

Theoretical and experimental analysis of the dental scaling tool geometry by ultrasonic waves on the rate of descaling

Articles in Press, Accepted Manuscript, Available Online from 01 February 2024

10.22034/ijme.2024.434413.1908

Aminollah Mohammadi; Alireza Fadaei Tehrani; Houman Rahnama

Numerical Simulation and fabrication of copper thin wall tube by constrained ironing method

Articles in Press, Accepted Manuscript, Available Online from 05 February 2024

10.22034/ijme.2024.434030.1899

Arya Kazemzadeh; Ghader Faraji

Performance Evaluation of Self-propelled Rotary Tool in Turning

Articles in Press, Accepted Manuscript, Available Online from 05 February 2024

10.22034/ijme.2024.435019.1915

Mohammad Azizi Yousefvand; Habibollah Akbari; Behnam Davoodi

Arrangement of gas fuel nozzle in power plant turbines with the purpose of temperature spread control and based on gas fuel flow rate

Articles in Press, Accepted Manuscript, Available Online from 05 February 2024

10.22034/ijme.2024.428239.1883

Parviz Asadi; Ali Fazli; Hossein Jafarzadeh; hossein maleki

The use of neuro-fuzzy network coupled with meta-heuristic learning methods to predict surface roughness in the machining of aluminum alloys

Articles in Press, Accepted Manuscript, Available Online from 13 February 2024

10.22034/ijme.2024.412021.1816

Amin Siahvashi; Mohammad Shahbazi; Seyed Ali Niknam

Experimental study of the effects of constrained groove pressing process on AA6061 sheet

Articles in Press, Accepted Manuscript, Available Online from 13 February 2024

10.22034/ijme.2024.433980.1895

Moein Gholami; Seyyed Ehsan Eftekhari; Masoud Rakhshkhorshid

Failure Mode, Effects & Criticality Analysis on C.N.C lathe engine spindle system in Uncertain Condition

Articles in Press, Accepted Manuscript, Available Online from 15 February 2024

10.22034/ijme.2024.420051.1856

Masomeh Lajevardy; Masoud Vaseei; Hoori Davoodi; Mohammadreza Nasiri Jan Agha; Milad Abolghasemian

Utilizing CNC technology in two-dimensional drawing and painting using a spray paint nozzle

Articles in Press, Accepted Manuscript, Available Online from 15 February 2024

10.22034/ijme.2024.436140.1923

Mohammad Amir Partanian; Behnam Moetakef-Imani

The effect of interlayer adhesion in predicting fatigue failure of 3D printed parts

Articles in Press, Accepted Manuscript, Available Online from 16 February 2024

10.22034/ijme.2024.434383.1906

Ehsan Amini; Alireza Fathi; Alimohammad Baghestani

Simulation of the forming process and the springback of the spacer part using the finite element method

Articles in Press, Accepted Manuscript, Available Online from 18 February 2024

10.22034/ijme.2024.434340.1905

Amir Mahdi Shouri; Seyed Mohammad Hossein Mousavi; Pouria Oliazadeh; Mohammad Hossein Farshidianfar

Three-Dimensional Geometry Profile Extraction of Deposits Using Linear Laser Scanning in the Directed Energy Deposition Additive Manufacturing Method

Articles in Press, Accepted Manuscript, Available Online from 25 February 2024

10.22034/ijme.2024.435811.1919

Sara Esfandiari Ghollezu; Mohammad Hossein Farshidianfar; Sina Nejati Eghteda

Investigating the influencing parameters on the surface roughness of polymer parts by Fused Deposition Modeling with respect to laser polishing

Articles in Press, Accepted Manuscript, Available Online from 27 February 2024

10.22034/ijme.2024.437063.1921

Seyed Morteza Mousavi Bafrooee; Seyed Morteza Mousavi; Mohammad Reza Movahhedy

Separation of healthy sperms using dielectrophoresis and thigmotaxis phenomena

Articles in Press, Accepted Manuscript, Available Online from 28 February 2024

10.22034/ijme.2024.422437.1870

Alireza Khouzestani; Mohammad Hossein Nasr-Esfahani; Yousef Hojjat; Marziyeh Tavalaee; Hesam Sadeghian

Production of aluminum-based composites from recycled chips by hot extrusion processing

Articles in Press, Accepted Manuscript, Available Online from 28 February 2024

10.22034/ijme.2024.432303.1889

Hamidreza Rezaei Ashtiani; Hossein Ehsani

Investigation of Mechanical and Thermal Properties of Continuous Metal Wire Reinforced Samples in Fused Deposition Modeling for Shape Memory Stimulus

Articles in Press, Accepted Manuscript, Available Online from 15 March 2024

10.22034/ijme.2024.434021.1898

MASOUMEH GHAEMI SARCHESHMEH; َََAmir Hossein Behravesh; seyyed kaveh hedayati

Experimental investigation of damage in corrugated multilayer sandwich panel under quasi-static three-point bending

Articles in Press, Accepted Manuscript, Available Online from 17 March 2024

10.22034/ijme.2024.419337.1849

Reihaneh Shahvari; Mohammad sajjad Gazor

Investigating the effect of Silica/Magnesium hydroxide composite nanoparticles on the flexural properties of polymer-based nanocomposites

Articles in Press, Accepted Manuscript, Available Online from 17 March 2024

10.22034/ijme.2024.435372.1917

Hossein Kazemi; Mazaher Salamat-Talab; Davood Ghanbari

Experimental and numerical investigation of the effect of die clearance on the cutting characteristics in the fine blanking of a complex part made of CK15 steel

Articles in Press, Accepted Manuscript, Available Online from 21 March 2024

10.22034/ijme.2024.440510.1924

Amin Safi Jahanshahi; Majid Elyasi; Farzad Ahmadi Khatir

The use of magnetic field to reduce the spring back in bending of aluminum sheet 1050

Articles in Press, Accepted Manuscript, Available Online from 21 March 2024

10.22034/ijme.2024.434812.1912

Hossein Eidi; Iman Zohourkari

Effect of Temper and Quench Heat Treatment on Mechanical Properties and Microstructure of AISI 4130 to AISI 4340 Steel Joint with GTAW Process

Articles in Press, Accepted Manuscript, Available Online from 21 March 2024

10.22034/ijme.2024.423695.1876

MEHDI Mizabi asl; majid belbasi; Mohammad Ammar Mofid

An experimental study of GLARE 2/1 and 3/2 tensile behavior using Digital Image Correlation

Articles in Press, Accepted Manuscript, Available Online from 21 March 2024

10.22034/ijme.2024.427374.1881

Alborz Mohebi; Gholamhossein Majzoobi; Mohammad Kashfi

Iranian Journal of Manufacturing Engineering

Journal Archive